MOTU UltraLite MK5: professional audio interface with two preamps, mixer and hardware DSP
Maxim Liadov
MOTU continues releasing interesting products. The UltraLite MK5 is currently a particularly promising mid-priced interface, with significantly improved electronics and a hardware mixer with DSP effects.
A large, excellent OLED display immediately distinguishes the UltraLite MK5 from earlier LCD models. Otherwise, the familiar layout remains: 2 front microphone preamps and many rear connections. There are 8 analogue inputs and 10 outputs.
As with other MOTU interfaces, the case is strong and entirely metal, with optional rack mounting.
MOTU UltraLite MK5 specifications
- Sample rates: 44.1, 48, 88.2, 96, 176.4, 192
- Microphone inputs: 2 XLR/TRS Line/microphone/guitar
- Guitar input impedance: 1 Mohm
- Line inputs: 6 balanced TRS
- Line outputs: 10 balanced TRS
- Digital I/O: ADAT, RCA S/PDIF
- USB: USB-C 2.0, iOS-compatible
- Total channels: 18 inputs / 22 outputs at 44/48
- MIDI input/output: yes
- Headphone outputs: 1
- Dimensions: 220 × 175 × 45 mm
- Weight: 1.31 kg
- OS: macOS 10.11 or later, Windows 10 or later
- Included software: CueMix 5, MOTU Performer Lite, 6 GB of loops and sounds from Big Fish Audio, LucidSamples, Loopmasters and MOTU
Despite the small case, MOTU fits many analogue and digital connections, including ADAT, S/PDIF and MIDI. It connects to any computer USB port. Internally it uses USB 2.0, with MOTU's typically low latency.
The high-level electronics make it a credible competitor to top studio interfaces.
Published input/output specifications
| Connector | Dynamic range | THD+N, unweighted | Level | |
|---|---|---|---|---|
| Line inputs | Balanced 1/4-inch TRS | 120 dB | -114 dB (0.0002%) | 24 dBu |
| Line outputs | Balanced 1/4-inch TRS | 125 dB | -114 dB (0.0002%) | 21 dBu |
| Microphone input |
Balanced XLR | 115 dB | THD+N: -113 dB; EIN: -129 dBu | Maximum: 0 dBu Gain: +74 dB |
| Headphone output |
1/4-inch stereo TRS | 118 dB | -110 dB (0.0003%) | Maximum: 14 dBu Impedance: <1 ohm |
Every input and output has excellent specifications. These figures have practical studio value. Recording can leave ample headroom rather than requiring maximum signal amplitude. High output performance keeps background noise inaudible even when the hardware mixer reduces monitoring level significantly in the digital domain. The figures also indicate high-quality electronics and careful engineering.
A 32-bit ATSAMS70N20 ARM processor controls USB.
An Analog Devices DSP and Altera MAX10 FPGA implement the hardware mixer and effects.
Digitally controlled PGA2500 microphone preamps are no surprise: they appear widely in MOTU professional rackmount interfaces.
The ESS Sabre 32 ES9026PRO DAC is new to us in MOTU equipment. It replaces the usual ES9016S with an 8-channel next-generation model.
The ADC is also recent and interesting: an 8-channel AK5578 from the new 55-series, used in high-end studio equipment.
We have seen the OPA1688 headphone amplifier in the MOTU M2/M4. It is a reasonable choice and sufficient for typical 32-ohm studio headphones.
Op-amps are good: LM49724 at inputs and OPA1678 at outputs.
Control is simpler than in earlier MOTU generations. The device display now shows meters only. All settings move to the PC/Mac control panel.
The main screen shows microphone-input, monitor-output and headphone settings.
Hardware settings include buffer size.
An input tab automatically selects line mode when a TRS plug enters a front combo socket. Pre Fx sends a dry signal to recording before DSP effects.
The output tab can link the front Main Out digital knob to any physical output or several outputs.
The hardware effects mixer creates 6 submixes on separate tabs.
Useful gate and compressor effects have graphical displays.
The 4-band graphical EQ is fairly advanced.
One shared reverb sits on a separate send bus. With some adjustment, it produces good results comparable to inexpensive hardware mixers.

Latency is low as expected: 6 ms at a 64-sample buffer and 44 kHz. MOTU advertises 2.4 ms at 96 kHz and 32 samples. There is no need to choose such a small buffer without a specific reason.
Features:
Input channels: 20
Output channels: 22
Input latency: 91
Output latency: 203
Min buffer size: 64
Max buffer size: 64
Preferred buffer size: 64
Granularity: 0
ASIOOutputReady - not supported
Sample rate:
8000 Hz - not supported
11025 Hz - not supported
16000 Hz - not supported
22050 Hz - not supported
32000 Hz - not supported
44100 Hz - supported
48000 Hz - supported
88200 Hz - supported
96000 Hz - supported
176400 Hz - supported
192000 Hz - supported
352800 Hz - not supported
384000 Hz - not supported
Input channels:
channel: 0 (Mic/Line/Inst In 1) - Int32LSB
channel: 1 (Mic/Line/Inst In 2) - Int32LSB
channel: 2 (Line In 3) - Int32LSB
channel: 3 (Line In 4) - Int32LSB
channel: 4 (Line In 5) - Int32LSB
channel: 5 (Line In 6) - Int32LSB
channel: 6 (Line In 7) - Int32LSB
channel: 7 (Line In 8) - Int32LSB
channel: 8 (Loopback In 1) - Int32LSB
channel: 9 (Loopback In 2) - Int32LSB
channel: 10 (S/PDIF In 1) - Int32LSB
channel: 11 (S/PDIF In 2) - Int32LSB
channel: 12 (Optical In 1) - Int32LSB
channel: 13 (Optical In 2) - Int32LSB
channel: 14 (Optical In 3) - Int32LSB
channel: 15 (Optical In 4) - Int32LSB
channel: 16 (Optical In 5) - Int32LSB
channel: 17 (Optical In 6) - Int32LSB
channel: 18 (Optical In 7) - Int32LSB
channel: 19 (Optical In 8) - Int32LSB
Output channels:
channel: 0 (Main Out 1) - Int32LSB
channel: 1 (Main Out 2) - Int32LSB
channel: 2 (Line Out 3) - Int32LSB
channel: 3 (Line Out 4) - Int32LSB
channel: 4 (Line Out 5) - Int32LSB
channel: 5 (Line Out 6) - Int32LSB
channel: 6 (Line Out 7) - Int32LSB
channel: 7 (Line Out 8) - Int32LSB
channel: 8 (Line Out 9) - Int32LSB
channel: 9 (Line Out 10) - Int32LSB
channel: 10 (Phones Out 1) - Int32LSB
channel: 11 (Phones Out 2) - Int32LSB
channel: 12 (S/PDIF Out 1) - Int32LSB
channel: 13 (S/PDIF Out 2) - Int32LSB
channel: 14 (Optical Out 1) - Int32LSB
channel: 15 (Optical Out 2) - Int32LSB
channel: 16 (Optical Out 3) - Int32LSB
channel: 17 (Optical Out 4) - Int32LSB
channel: 18 (Optical Out 5) - Int32LSB
channel: 19 (Optical Out 6) - Int32LSB
channel: 20 (Optical Out 7) - Int32LSB
channel: 21 (Optical Out 8) - Int32LSB
All rates up to 192 kHz are supported. Headphones are independent of line outputs. Loopback channels support streaming.
RMAA testing
| Device under test | [ASIO] MOTU UltraLite-mk5 |
| Operating mode | 24-bit, 44 kHz |
| Audio interface | ASIO |
| Signal path | External loopback (line-out - line-in) |
| RMAA version | 6.4.5 PRO |
| 20 Hz–20 kHz filter | YES |
| Signal normalization | YES |
| Level change | 0.5 dB / 0.5 dB |
| MONO mode | NO |
| Calibration signal frequency, Hz | 1000 |
| Polarity | Correct/correct |
| Frequency response variation (40 Hz–15 kHz), dB | +0.05, -0.62 |
Good |
| Noise level, dB(A) | -118.1 |
Excellent |
| Dynamic range, dB(A) | 118.0 |
Excellent |
| Harmonic distortion, % | 0.00016 |
Excellent |
| Harmonic distortion + noise, dB(A) | -108.0 |
Excellent |
| Intermodulation distortion + noise, % | 0.00053 |
Excellent |
| Stereo crosstalk, dB | -117.5 |
Excellent |
| Intermodulation at 10 kHz, % | 0.00055 |
Excellent |
| Overall rating | Excellent |
See the RMAA report for details
Tests confirm the interface's high specifications.

The spectrum contains few harmonics and no interference, matching high-quality studio equipment. Results are much better than earlier UltraLite models.
We recorded a Neumann TLM102 through the UltraLite MK5 and compared it with the less expensive MOTU M2. Their different preamps and ADCs produce slightly different character. Both recordings were good, with the UltraLite MK5 sounding slightly more refined.
The UltraLite MK5 also played better. The difference is small but audible. The M2 sounds harder, with simpler electronics. Users seeking a clearly audible upgrade from an affordable interface should consider the UltraLite MK5.
Conclusions
We liked the UltraLite MK5 very much. It is mid-priced but competes with many high-end devices in functions and sound. Many I/O channels, submixes and hardware DSP suit rehearsals, small-group recording and external effects routing. Updated electronics deliver high-quality sound. Controls are simple and settings clear enough to understand without the manual.
Note. This is an adapted machine translation into English. It follows the “In simple terms” approach. Read the original article at https://prosound.ixbt.com/interfaces/motu-ultralight-mk5.shtml.



















