ADAM Audio Sub10 PRO — an active studio subwoofer with DSP
Following the Sub8 PRO model, ADAM Audio has added the 10-inch Sub10 to its PRO series of professional subwoofers. The Sub10 works with studio monitors. Its built-in DSP supports network control and room-correction profiles.
Photo: official website
adam-audio
The subwoofer has a rigid MDF enclosure. The front bass-reflex port is designed to reduce airflow noise. Users can change settings in ADAM Control over Ethernet. ADAM Control provides a parametric equalizer and level, delay and phase settings to match the main monitors. Sonarworks SoundID Reference calibration filters can be loaded directly into the DSP. Room correction therefore works without a plugin running continuously in the DAW.
Photo: official website
adam-audio
ADAM Audio Sub10 PRO specifications
- Frequency range: 21–300 Hz (-6 dB);
- Amplifier power: 200 W RMS, 325 W peak;
- Maximum sound pressure level: 106 dB SPL;
- Phase adjustment: in -45° steps down to -315°;
- Crossover frequencies: 70, 85, 100 and 115 Hz;
- Weight: 22.8 kg.
A 10-inch woofer handles low frequencies. The woofer has a fiber-reinforced paper cone and a rubber surround that allows long excursion. A metal grille protects the driver. A Class D amplifier powers the woofer. There are three modes: Stereo for use with a pair of monitors, LFE for a dedicated low-frequency effects channel, and Wide for the subwoofer's full available frequency range.
Photo: official website
adam-audio
Analog connections include two balanced XLR/TRS combo inputs and a pair of XLR outputs for connecting monitors. AES3 input and output are provided for digital integration. A separate 6.3 mm socket accepts a bypass footswitch. Other features include delay adjustment up to 10 ms, level adjustment from -18 to +6 dB, and overload and overheat protection.
Photo: official website
adam-audio
The ADAM Audio Sub10 PRO is available for $1500.