LEWITT LW6 — wireless closed-back studio headphones

LEWITT has released its first full-size wireless headphones. According to the manufacturer, the model is designed specifically for professional studio mixing, mastering and monitoring.

Photo: official website lewitt-audio

The new model uses LEWITT's RealSound wireless technology. Unlike Bluetooth, RealSound operates in an ultra-wideband frequency range from 6.8 to 10.2 GHz, depending on the region. This provides much more bandwidth than Bluetooth and carries uncompressed PCM audio at 1,728 kbit/s with 5.8 ms latency.

Photo: official website lewitt-audio

The headphones pair with a compact LW TX transmitter. It connects to the same socket normally used for wired headphones, for example on an audio interface, or directly to a computer through USB-C. Within a 5 m range, audio is transmitted without compression or noticeable delay. The LW6 has 40 mm dynamic drivers with biocellulose diaphragms, memory-foam earpads and a silicone headband.

Photo: official website lewitt-audio

Built-in DSP includes a five-band equalizer for creating sound profiles and saving them in the device. A single button switches profiles without connecting to a computer or smartphone. Virtual Studio Monitors simulates an acoustically treated mixing room. Loudness Guard protects hearing against dangerous peak levels by allowing a user-set limit. Advanced monitoring functions check audio in mono, side-stereo and side-mono modes and swap left and right channels directly in the headphones.

Photo: official website lewitt-audio

LEWITT LW6 specifications

Type: closed-back, dynamic
Maximum sound pressure level: 121 dB
Frequency range: 20 Hz–20 kHz
Sensitivity: 114 dB
Impedance: 32 ohms
Dimensions: 22 × 18.9 × 8.6 cm
Weight: 358 g without cable.

Other features include two customisable buttons with single- and double-press actions, and control software for computers and smartphones. A transmitter thread adapter secures the LW TX to microphone stands. Battery life in RealSound mode is up to 21 hours, with a full charge taking 80 minutes; a 15-minute charge provides three hours of use. USB-C charging is possible while listening. Wired options include a USB-C audio interface connection with an ASIO driver and a 3.5 mm analogue input. Bluetooth 5.3 supports SBC and AAC. The included Space Replicator Essential plugin simulates real listening spaces, from high-end mixing studios and clubs to car interiors.

Photo: official website lewitt-audio

LEWITT LW6 is available for $700.