ProSound

Professional Audio News & Reviews

Menu

JBL 104-BT — compact monitors with Bluetooth support

Grigory Liadov

We recently tested the compact monitors JBL 104 and were pleasantly surprised by their sound. Today's 104-BT is their Bluetooth version: the same speakers with added wireless connectivity.

A special feature of the JBL 104-BT is its coaxial driver. The tweeter sits at the centre of the woofer. This aligns the two drivers, improves phase performance and allows a smaller enclosure.

Coaxial drivers are uncommon in studio monitors because size is less important in a recording studio. But music production now happens far beyond traditional studios, and large monitors are not always practical. Home studios, location work and interior design requirements may all impose limits. The JBL 104-BT fits these situations well: it is compact, easy to transport, professionally voiced, attractive and affordable. By studio equipment standards, the price is low enough for almost anyone.

JBL 104-BT specifications

General
Acoustic design Bass reflex
Cabinet ABS plastic
Woofer 4.5-inch paper cone
Tweeter 19 mm fabric-dome tweeter
Frequency range 60 Hz–20 kHz (-10 dB)
Maximum continuous SPL 89 dB
Maximum peak SPL 104 dB
Amplifier
Type Class D
Power 60 W (30 W per speaker)
Crossover 1.725 kHz
Harmonic distortion 0,2 %
Signal-to-noise ratio 75 dBA
Connections
Bluetooth 5.0
Balanced input 1/4 TRS
Unbalanced input RCA
Additional unbalanced input (AUX) 1/8 TRS
Headphone output 1/8 TRS
Other specifications
Weight 3.8 kg (2.06 kg + 1.73 kg)
Dimensions 247 × 153 × 124 mm

Unlike the earlier wired model, the JBL 104-BT comes in black or white. We tested the white version. The design is bold and original. Rounded cabinets look elegant and also help reduce acoustic interference.

The appearance is otherwise the same as the wired JBL 104. Only the control panel differs: it adds an input selector alongside the volume control and sockets.

The cabinets still use impact-resistant moulded plastic. Metal grilles protect the front drivers from damage during transport.

The pair weighs just under 4 kg. Rubber bases prevent sliding on a desk and reduce vibration transfer.

The woofer has a rubber surround and a 9.5 cm paper cone. The tweeter uses a fabric dome. A first-order crossover divides the bands at 1725 Hz.

The speakers use rear bass-reflex ports. One cabinet contains the amplifier and all source connections; the passive speaker connects through the included ordinary two-core cable. Balanced sources use TRS sockets. Unbalanced sources use RCA or the front mini-jack.

Controls are limited to volume and input selection. The input selector is an important addition: it allows monitoring of one input or all inputs at once.

Bluetooth pairing is simple and familiar. Select Bluetooth, then hold the source button to enter pairing mode.

The monitors enter standby after 20 minutes without an input signal. The Bluetooth connection remains active.

The volume knob has 20 fixed positions for convenient adjustment. A ring around it lights white when the speakers are on.

The JBL 104-BT Class D amplifier uses an STA350BW chip. Its rated output is 2 × 50 W into 6 ohms, consistent with the specifications.

Frequency-response measurements

Our measurements use the hardware and software measurement system RightMark™ Audio Analyzer PRO. We also use an Earthworks M50 measurement microphone with the following specified data:

  • Serial number: 9291C
  • Sensitivity at 1 kHz: 26.4 mV/Pa
  • Frequency response variation, 20 Hz–20 kHz: 0.2 dB
  • Frequency response variation, 3 Hz–50 kHz: +1/−3 dB (roll-off from 45 kHz)

Frequency response measured on the driver axis

Our measurements clearly show the JBL 104-BT operating range. Because the port faces backwards, this graph does not show the full bass output. In use, bass is fuller. The manufacturer gives a port tuning frequency of 72 Hz, effectively supporting the small woofer.

Sound

The JBL 104-BT sound quality is high and matches the wired JBL 104. As noted earlier, the coaxial design is fully justified here. It adds no unusual coloration or obvious drawbacks. The sound character is like that of speakers with separate driver positions.

The JBL 104-BT is clearly suitable for professional work. Its even, balanced and fairly neutral sound allows many everyday audio tasks. It cannot replace full-sized monitors, but these small speakers can handle much routine work successfully.

The JBL 104-BT avoids, or greatly reduces, the usual weaknesses of portable speakers. Bass does not seem lacking, volume headroom is more than sufficient, and tonal accuracy is good.

One limitation is the JBL 104-BT's fairly narrow dispersion, also present in the wired version. Aim the speakers directly at the listener for the best result. This is good practice with any speakers, but especially important for the JBL 104. Otherwise, treble loses fullness.

Despite the advertising photographs, placing the speakers directly on a desk is suitable mainly for background listening. They are small and have no angled stands, so their axes will point well below the required height. Position matters less for background music, but serious audio work needs correct placement to obtain the full sound.

Conclusions

We find the wireless JBL 104-BT more attractive than the earlier ultra-portable model JBL One Series 104. At almost the same price, it adds Bluetooth, input routing selection and another colour option. These make it more flexible and convenient. The JBL 104-BT looks good, sounds good, connects easily and also works very well as a high-quality powered computer speaker system.



Note. This is an adapted machine translation into English. It follows the “In simple terms” approach. Read the original article at https://prosound.ixbt.com/monitors/jbl-one-104bt.shtml.