ProSound

Professional Audio News & Reviews

Menu

AuraSonics KN4 — affordable active four-inch monitors

Grigory Liadov

AuraSonics was created in 2022 by one of Russia's largest professional audio distributors, AudioProject. Current events and the departure of some international brands left a gap in the Russian market. Drawing on extensive audio experience, AudioProject decided to develop its own active speakers under the AuraSonics name.

AuraSonics monitors are inexpensive active speakers. They appeal both to audio professionals and to a broad audience wanting a proper active system for music and a desktop workspace.

A company representative says these monitors are not standard OEM models from a Chinese factory. They were developed to a unique specification prepared by AuraSonics staff. Negotiations through to production therefore took more than a year. The first models are expected in general sale in late May or June 2023.

The range currently includes the KN3 and KN4, differing in cabinet and woofer size. The KN3 has a 3.5-inch woofer and the KN4 a 4.5-inch woofer. The manufacturer's website also indicates Bluetooth versions for wireless mobile-device connection.

We start with the larger KN4 model, without Bluetooth.

AuraSonics KN4 specifications

Drivers
Woofer 4,5"
Cone Polymer
Tweeter Fabric dome tweeter
Driver size 1"
Amplifier
Amplifier type Digital, Class D
Power 2 × 30 W
Connections
Balanced TRS
Unbalanced RCA, mini-jack
Headphone output Mini-jack
Other specifications
Frequency range 80 Hz–20 kHz
Cabinet MDF, vinyl laminate finish
Dimensions 163 × 245 × 183 mm

The KN4 is an active two-way system with amplification in one speaker. There is no separate driver bi-amping. Instead, the speakers offer many connections, from professional balanced inputs to wireless on the BT version.

The MDF cabinets have a laminate finish and plastic front panels. Waveguides around the drivers help produce a more even sound field.

The speakers use bass reflex, with a round rear port.

All KN models use a conventional 1-inch fabric dome tweeter protected by a metal grille.

The KN4 has a 4.5-inch polymer-cone woofer. As usual, the stated size refers to the mounting-bolt diameter. Actual cone diameter including the rubber surround is 10.5 cm.

The active speaker's lower front panel has master volume, an AUX input, headphone output, and power indicator. An energy-saving mode uses low power without audio, shown by a red indicator. A signal at any input, including Bluetooth on the KN3BT and KN4BT, wakes the monitor and turns the light blue. After more than 15 minutes without audio, standby resumes.

Included self-adhesive rubber pads provide surface isolation. The user attaches them underneath the cabinets.

The active monitor's rear panel holds inputs and tone controls. TRS sockets accept balanced signals, while stereo RCA serves consumer sources. Only one speaker contains an amplifier. A supplied 2-meter two-core cable connects the passive speaker through bare-wire spring terminals. Mini-jack-to-mini-jack and mini-jack-to-stereo-RCA source cables are also included.

Alongside master volume, separate bass and treble controls adjust tone. Our measurements identify the affected frequencies.

Class D amplification uses a FourSemi FS2105 chip. This less familiar but interesting device combines an amplifier, DSP, and DAC. Its rated power reaches 2 × 30 W into 8 ohms. A PCM1808 ADC handles line inputs, with 99 dB signal-to-noise and -93 dB THD+N specifications. The DSP provides a 15-band parametric equalizer used to correct monitor response. Programming is factory-only, with no user access.

Measurements

Our measurements use the hardware and software measurement system RightMark™ Audio Analyzer PRO. We also use the measurement microphone Earthworks M50, with the following specified data:

  • Microphone serial number: 92901C
  • Microphone sensitivity at 1 kHz: 26.4 mV/Pa
  • Microphone frequency-response variation from 20 Hz to 20 kHz: 0.2 dB
  • Microphone frequency-response variation from 3 Hz to 50 kHz: +1/−3 dB (roll-off from 45 kHz)

Frequency response measured on the tweeter axis

Measurements show 70 Hz–22 kHz coverage, with an even midrange and small rises at both ends.

These results are normal for inexpensive speakers.


Frequency response at different tone settings

Measurements show bass adjustment of ±4 dB below 300 Hz. Treble adjustment operates above 1 kHz over ±5 dB.

Sound

The KN4 has a bright, impressive sound with full midrange and natural tone. It performs convincingly among inexpensive speakers and can outperform many similar models with a shared amplifier. AuraSonics does not claim reference-monitor performance, but delivers good sound with a modern, lively character.

There are no obvious weaknesses demanding specific EQ. Interestingly, the most natural sound comes with the tone knobs at minimum. Our measurements show that they effectively act as boost controls. Even at their middle positions, bass and treble dominate the midrange. Fully counterclockwise settings gave our room the most acceptable, neutral sound. Room acoustics and damping will affect the result.

The manufacturer explains: Sales experience with similar products showed that most KN3 and KN4 buyers would use them as good computer speakers for music listening. The user might be elsewhere in the room rather than at the ideal position in front of the computer.

Curtains, soft furniture, carpets, and other household objects also absorb high frequencies. The company therefore chose a Hi-Fi-style balance with raised bass and especially treble, since these frequencies become less audible away from the main speaker axis.

For users who need the speakers specifically as monitors, bass and treble controls allow extensive tonal correction.

The small KN4 cannot be expected to provide rich, highly detailed lower midrange. Its four-inch driver mainly covers higher frequencies. Nevertheless, lower midrange is not missing, and overall frequency balance is reasonable.

The KN4 tweeter should face the listener. Above its axis, upper-midrange and treble energy decrease. We do not recommend simply placing the speakers on a desk. The fullest sound occurs below the tweeter axis. Stands or angled supports are preferable.

Bass fullness is sufficient for the small cabinet size. The KN4 port works well and adds no unwanted resonant sounds.

Conclusions

Overall, the KN4 is a successful inexpensive speaker with good sound. It suits everyday tasks such as video soundtrack editing, synthesizer or DJ playback, and computer desktop audio.

The KN4's strengths are good sound, convenient volume control, several connection options, headphone output, and an affordable price.



Note. This is an adapted machine translation into English. It follows the “In simple terms” approach. Read the original article at https://prosound.ixbt.com/monitors/aurasonics-kn4.shtml.