Axelvox DWS7000HT (FC Bundle) — a wireless system with four handheld transmitters

Grigory Liadov

Axelvox regularly adds interesting new products to its range. The headphone series recently received a major update, including the Axelvox HD, and new Axelvox DWS7000HT wireless system packages were introduced in early 2025. Today we will look at one of them, the Axelvox DWS7000HT FC Bundle.

This system has sold successfully on the Russian market for a long time. It is one of the most affordable UHF wireless systems. Its clear strengths include reliable reception, good build quality, and good microphones. Axelvox offers ready-to-use packages for different needs. There are sets with handheld transmitters and sets with bodypack transmitters for a lavalier or headset microphone. There is even a personal monitoring system, the PM Bundle. All these packages use two-channel receivers, allowing only two transmitters to work at once. The new Axelvox DWS7000HT FC Bundle has a four-channel receiver for simultaneous use of four handheld transmitters. The new packages also have rackmount receivers, making integration into existing systems easier.

The Axelvox DWS7000HT FC Bundle under review consists of a four-channel receiver and four handheld transmitters. The new rackmount range also includes two-channel RT Bundle and TD Bundle systems, each with two handheld transmitters. We will cover those another time.

Receiver specifications

Number of channels	Four
Operating frequency range	710–726 MHz
Signal modulation	PI/4-DQPSK
Transmitter pairing	IR port
Display	LCD display
Power supply	12 V
Housing	Metal
Connections	1/4-inch TRS mixed output, separate balanced XLR outputs

As a reminder, the Axelvox DWS7000HT operates in the 710–726 MHz UHF band. It uses advanced 4-DQPSK modulation with high resistance to interference. Compared with conventional modulation methods, 4DQPSK significantly increases the channel's data capacity and provides more reliable signal transmission.

The AX-7000F receiver has a strong metal housing for rack installation. Rubber feet underneath also allow the receiver to stand on a flat surface. The two large displays clearly show RF signal strength, transmitter signal level, and the selected frequency for each channel.

The Axelvox DWS7000 is easy to use and has no complex settings. To start, press the scan button, select the most suitable channel, and synchronize the frequency with the transmitter. Apart from adjusting the microphone volume on the receiver, nothing else is normally required. The down-arrow button scans the radio environment; the up-arrow button switches channels. SET synchronizes the receiver and transmitter frequencies through the infrared port. The system provides 15 fixed-frequency channels. It automatically assigns the channel frequencies; manual frequency adjustment is not available.

The receiver connects to a mixer through separate balanced XLR outputs. There is also an unbalanced 1/4-inch TRS output combining all four microphone signals. The removable antennas allow the use of an antenna splitter.

The Axelvox handheld transmitters are full-size microphones. Unlike those in many affordable systems, the transmitter housing is all metal. The microphone has a moderate weight, well distributed along the housing. Flat sections on the protective grille stop the microphone from rolling across a surface.

Handheld transmitter specifications

Capsule	Dynamic
Polar pattern	Cardioid
Gain/attenuation level	-10 dB
Maximum input signal level	-20 dBV
Housing	Aluminum
Power supply	Two AA batteries
Operating frequency range	710–726 MHz
Display	LCD display
Signal modulation	PI/4-DQPSK
Receiver pairing	IR port

The handheld transmitter uses two AA batteries. As usual, the battery compartment is in the lower part of the microphone under a screw-on cover.

 

The microphone has a small display and a power button. The display shows the selected frequency and battery charge. It is bright and dims after 10 seconds of activity. An infrared port next to the display synchronizes the transmitter with the receiver. Hold the button for 2 seconds to turn the microphone off completely. When the transmitter is turned off, the receiver automatically detects the loss of signal and mutes the unused channel to prevent possible interference.

Under the metal grille is a conventional dynamic capsule with a cardioid polar pattern. A thin foam layer inside the grille provides extra protection against wind and breath noise. The new handheld transmitters differ slightly from earlier models because they use a different capsule design. The damping and vibration isolation system has changed.

 

We tested the Axelvox DWS7000HT FC Bundle in different conditions and found no problems or failures. Reception was stable, without noticeable delays or dropouts. Receiver noise is low for an affordable system. The handheld transmitters in the new sets no longer have sensitivity adjustment, but the available level is sufficient for comfortable use.

As we have said before, the microphones sound very good. Considering the low price of the system, the capsules are of a good standard. The microphones have their own tonal character, but this is not a serious problem for professional use. Capsule isolation from handling noise is also excellent. Even when the housing is handled firmly, low-frequency thumps and rustling do not reach the capsule. These noises are common in cheap handheld models.

Conclusions

The Axelvox DWS7000HT remains one of the most attractive affordable systems on the Russian market. The new four-channel packages make operation easier, especially when many microphones are needed. The rackmount receiver is also useful for rental work. The Axelvox DWS7000HT is an excellent option for sound reinforcement at events, presentations, and performances. Despite the new capsule design, the handheld transmitters retain the same good sound quality.