ProSound

Professional Audio News & Reviews

Menu

Simple Way Audio J1: JFET DI box with a field-effect transistor input stage

Maxim Liadov

Simple Way Audio equipment is well known among professional sound engineers and musicians. Since 2013, a small team of talented engineers has developed and made high-quality DI boxes. Many companies offer these devices for guitarists, usually based on standard op-amps. Ordinary op-amps are general-purpose chips rather than designs made specifically for audio. The low current available from phantom power limits their use in DI boxes: designers often must choose chips that can operate under these conditions rather than the best-performing types. Simple Way Audio takes a different approach and uses no op-amps. Instead, its circuits contain discrete transistors and other individual components. This gives designers freedom to optimize the circuit and components for audio, aiming for much better specifications and sound. Feedback from experienced, demanding live and studio engineers suggests they have succeeded. Build quality is good and prices are reasonable. It is especially pleasing for us that the designers come from Russia.

In 2018, we introduced readers to the Simple Way Audio D1 DI box with bipolar transistor inputs. Its sound quality was excellent both in listening and measurements. Clean, dynamic sound makes these DI boxes useful on stage and in the studio. Besides electric and bass guitars, they accept synthesizers without problems. For this reason, users often buy several Simple Way Audio DI boxes together rather than just 1.

In 2022, Simple Way Audio announced that it was moving production to Russia, becoming a fully Russian manufacturer rather than simply having links to the country. To mark this change, we published an interview with Simple Way Audio founder Petr Glushkov and business owner Olga Lomovskaya. They discussed their philosophy and approach to product development in detail. They also explained the reason for good sound and record specifications. Low nonlinear distortion comes from linearizing individual transistor stages, rather than using global negative feedback as other manufacturers do. The small circuit has just two stages: an input converter changes the unbalanced signal to balanced, followed by a balanced power amplifier with low output impedance.

The manufacturer continues to improve its technology. More modern PCB layouts, SMD components and automated production have halved DI box dimensions and weight. Specifications have also improved significantly. This comes from circuit optimization, shorter tracks and careful component selection. For example, Simple Way Audio uses precision thin-film resistors with 1% tolerance instead of the cheaper 5% types often found in equipment. These are only some of the details behind the products. Much development work is less visible, including collecting user feedback and requests that encourage further improvements. The D1 was followed by the J1, the subject of this review.

The Simple Way Audio J1 range includes popular single-input models and stereo versions with two inputs. It expands the choice rather than directly replacing the D1, giving familiar instruments a different sound. The main change is a JFET input stage. Unlike bipolar transistors, these field-effect transistors are normally on and controlled by voltage rather than current. Their useful practical property is good impedance matching between stages, so they often appear at inputs. Musicians may want to try the J1 with different pickups and compare the resulting tone and dynamics.

Build quality leaves nothing to criticize. Two aluminium halves, held together with screws, form a very strong case.

Nuts secure the sockets. The small switches with metal shields also look reliable.

The output side has an unusual green XLR connector carrying +48 V phantom power. A blue LED indicates its presence.

The manufacturer also considers musician safety. A red light warns of voltage on the instrument. If it lights, technical staff must resolve the grounding problem.

The table compares Simple Way Audio D1 and J1 specifications with competitors:

D1 J1 BSS Klark Radial J48
Input impedance >4,7 MΩ 4,7 MΩ 1 MΩ 1 MΩ 200kΩ
THD at 0 dBu 0.0008% 0.0009% 0.005% 0.005% 0.002%
Input type Bipolar transistors Field-effect transistors Operational amplifier Operational amplifier Operational amplifier
Output Impedance <33Ω <33Ω 600Ω 2kΩ 200Ω
Headroom +14 dBu +14dbu +9dBu +10dBu +10dBu

Simple Way Audio specifications are clearly ahead of the competitors shown. To support these figures, the manual on the official Simple Way Audio website includes a measurement graph:

We wanted to verify the results ourselves. We used a Lisk Audio MUX interface with balanced inputs set to 1 volt sensitivity.

With a 0 dBu test signal recorded through the balanced input, we measured even lower distortion: just 0.0003%. This comfortably confirms the specified 0.0009%.

The internal photo confirms that there are no chips. The circuit uses only discrete components. Small SMD parts shorten tracks and improve technical performance. All components are modern and intended for long service life.

The following examples compare the Simple Way Audio J1 with the guitar input of an Audient id14 interface. The same interface recorded both, making the comparison reasonably fair.

Audient id14 Hi-Z, no processing:

Simple Way Audio J1, no processing:

Audient id14 Hi-Z, effects enabled:

Simple Way Audio J1, effects enabled:

The guitar sounds cleaner and more open. There is no sense of restriction, and the music comes through more clearly.

Professional sound engineers and musicians have already chosen Simple Way Audio products. The official website publishes opinions from specialists including Alexander Perfiliev (producer and FOH engineer for Yolka), Vladimir Gubatov (FOH for Nargiz, Vladimir Presnyakov Jr., Scriptonite and Inna Zhelannaya), Ilya Lukashev (studio engineer and Therr Maitz FOH engineer), Pavel Bolotov (Diskoteka Avariya, Polina Gagarina, Scriptonite, Matrang, Mirazh and Azamat), and Nikolai Lukyanov (Nochnye Snaipery, Tesla Boy, Guru Groove Foundation, Triangle Sun and Tantsy Minus). Without repeating the promotion, we can say that the first large J1 batch reached stores and buyers successfully. Another batch is coming soon.

Conclusions

The manufacturer has put considerable work into another excellent small DI box. Size and weight are lower, specifications are better, and sound quality remains at the same very high level. Production moved to Russia in 2022, another reason for local buyers to consider Simple Way Audio. We wish the team success and look forward to more interesting products.

DI box Simple Way Audio J1 provided
for testing by Pyotr Glushkov.
Official website Simple Way Audio



Note. This is an adapted machine translation into English. It follows the “In simple terms” approach. Read the original article at https://prosound.ixbt.com/interfaces/simpleway-j1.shtml.