ProSound

Professional Audio News & Reviews

Menu

PreSonus Revelator io24: affordable two-channel interface with hardware processing

Grigory Liadov

In early 2021, American manufacturer PreSonus introduced its Revelator series, starting with the condenser microphone PreSonus Revelator. The Revelator io24 USB interface followed and is the subject of this review. Revelator's main feature is hardware DSP for real-time input processing, important for streams, broadcasts and live performance. People often assume a good microphone alone is enough. Even speech benefits from basic EQ and dynamics processing, while live instruments may need more. Revelator devices stand out here and seem particularly suitable.

These effects are useful tools rather than additions for a feature list. Algorithms come from the more expensive PreSonus StudioLive Series III mixers and can produce professional sound. Flexible routing and simple control in one panel are major advantages. Alternatives require extra software and may create uncertainty about processed monitoring and overall stability. Here, turn it on and it is ready in ten seconds, without difficulty.

The Revelator io24 is a two-channel USB-C interface with two microphone/instrument inputs, stereo output and headphones. A small display shows levels and current settings. Additional internal I/O appears in applications, giving a total of 6 inputs and 6 outputs, explained below.

PreSonus Revelator io24 specifications

General
Frequency range 44.1, 48, 88.2, 96, 176.4, 192 kHz
Bit depth 24-bit
ADC chip dynamic range 105 dB
DAC chip dynamic range 105 dB
Microphone inputs
Maximum signal level +10 dBu
Gain 60 dB
Frequency response 20 Hz–20 kHz (+0.1 / -0.3 dB)
THD+N 0.005% at minimum gain
EIN -126 dBu (A-weighted, 150Ω, max gain)
Impedance 1.4 kohms
Phantom power +48 V, 10 mA
Instrument inputs
Maximum signal level +10 dBu
Gain 50 dB
Frequency response 20 Hz–20 kHz (+0.1 / -0.3 dB)
THD+N 0.005% at minimum gain
Impedance 1 Mohm
Line outputs
Connector

TRS

Maximum level +10 dBu
Frequency response 20 Hz–20 kHz (+0.1 / -0.3 dB)
THD+N 0.003%
Headphone amplifier
Power 40 mW/channel into 56 ohms
Frequency response 20 Hz–20 kHz (+0.1 / -0.5 dB)
THD+N 0.01%
Supported headphone impedance 32–300 ohms
Dimensions and weight
Height 45–63.5 mm
Width 158.8 mm
Depth 158.8 mm
Weight 0.9 kg

The Revelator io24 has an unusual metal case with an enlarged front panel. This leaves space for connectors, display, one knob and many large buttons for switching control modes.

Revelator io24 inputs are on the front. Two combo XLR/TRS Mic/Inst sockets use familiar XMAX-L preamps, as in other compact PreSonus devices. We have repeatedly praised their detail and low noise.

Specifications are closest to the Studio 24c: similarly low -126 dBu equivalent input noise, a useful 60 dB gain reserve and comparable headphone power. Converter distortion and dynamic range are also similar.

The display shows input and output levels. Hardware adjustment uses 1 dB steps. Its small nonlinear level scale is informative, and clipping indication is provided. The interface also controls headphone and line-output volumes separately and adjusts input/playback monitoring balance.

The red button below the knob mutes only line output, leaving headphones active. Large Preset buttons switch input hardware-processing presets. Numbered buttons open input setup.

Input setup adjusts gain more precisely, activates phantom power and enables the low-cut filter.

Access to main settings on the hardware is very useful. Users can quickly adjust levels, choose processing and set monitoring balance without searching the computer screen.

All outputs are on the rear. Headphones and line outputs use TRS sockets. Full-size DIN5 MIDI input and output connect MIDI equipment. The interface uses USB bus power only. A computer cable with USB-C at the interface end is included.

Full computer operation requires the dedicated driver. Only 64-bit Windows 10 and macOS 10.13.6 or later are supported. Earlier operating systems are not supported.

The shared PreSonus Universal Control panel selects Revelator io24 buffer size and sample rate. All other settings are in an additional, attractively designed mixer window.

Although physically two-channel, the Revelator io24 adds two Loopback returns for live broadcasts, shown as extra system sources. Most interfaces offer one return; this has two. Each can have an individual mixer submix. Users choose not only an application input/output but also which signals it carries and at what levels.

The system therefore sees three stereo inputs and three stereo outputs. The first pair corresponds to microphone inputs and Main output. The others are virtual Loopback 1 and Loopback 2 sources, available as I/O in different apps.

Inputs can go directly to the DAW, bypassing the mixer as on simple interfaces. In that case, BLEND adjusts input monitoring against the main mix. We also liked separate headphone and Main volume, often combined on two-channel products.

The Revelator io24 routing options are welcome. Most users may not need all of them, but group streams with Skype or Zoom calls benefit from the flexibility.

Revelator io24 hardware processing matches the Revelator microphone.

Each input has six processing blocks, usable together or separately: low-cut filter, gate, compressor, EQ, limiter and Voice FX. Compressor and EQ order can be swapped.

This is effectively the Fat Channel processing chain from professional PreSonus StudioLive mixers. It may look excessive, but radio studios similarly use microphone processors for EQ and dynamics after the presenter's microphone. Voice FX adds creative effects, and a separate reverb works on its own bus outside the presets.

Users need not understand every block in detail. Each has presets with simple names such as low, moderate, high, vocal, bass guitar and acoustic. Their differences are easy to hear, helping selection.

A global preset saves all microphone-channel settings. There are 16 slots, with 8 already prepared for particular tasks. Examples include Broadcast for speech, Vocal for singing, Acoustic Guitar and Space Overlord for distorted gaming voices. Three frequently used configurations can be placed in a separate section and switched with front PRESET buttons and an assigned button.

Experienced users can open advanced settings for each processing block.

Four-band EQ comes in three forms: a conventional graphical version and vintage emulations with characteristic sound and fixed parameter values.

The compressor also has three types: conventional processing with standard controls and a compression-curve display, plus tube and FET emulations with their characteristic saturation.

Voice FX includes Doubler, De-Tuner, Vocoder, Ring Modulator, Filter and Delay, allowing major changes and deliberate voice distortion.

Revelator io24 hardware processing is extensive and flexible enough to suit different tasks and sources. We connected a high-quality Neumann TLM102 condenser and an inexpensive unbranded Chinese electret microphone. Processing made voice tone noticeably better, clearer and more pleasant in both cases.

Let us examine the electronics.

A Cortex-M7 ARM processor handles all hardware processing. The Revelator microphone uses a similar DSP.

A two-channel CS4270 codec supports 24-bit/192 kHz. ADC specifications are 105 dB dynamic range and -95 dB THD+N; DAC figures are 105 dB and -87 dB respectively.

The headphone output uses a JRC4556A op-amp as a current buffer, typical of affordable devices.

RMAA testing

Device: Revelator ASIO
Features:
Input channels: 6
Output channels: 6
Input latency: 697
Output latency: 757
Min buffer size: 32
Max buffer size: 4096
Preferred buffer size: 512
Granularity: -1
Sample rate:
8000 Hz - not supported
11025 Hz - not supported
16000 Hz - not supported
22050 Hz - not supported
32000 Hz - not supported
44100 Hz - supported
48000 Hz - supported
88200 Hz - supported
96000 Hz - supported
176400 Hz - not supported
192000 Hz - not supported
352800 Hz - not supported
384000 Hz - not supported
Input channels:
channel: 0 (Mic/Inst 1) - Int32LSB
channel: 1 (Mic/Inst 2) - Int32LSB
channel: 2 (Loopback Input 1 (L)) - Int32LSB
channel: 3 (Loopback Input 1 (R)) - Int32LSB
channel: 4 (Loopback Input 2 (L)) - Int32LSB
channel: 5 (Loopback Input 2 (R)) - Int32LSB
Output channels:
channel: 0 (Main/HP Out L) - Int32LSB
channel: 1 (Main/HP Out R) - Int32LSB
channel: 2 (Loopback Output 1 (L)) - Int32LSB
channel: 3 (Loopback Output 1 (R)) - Int32LSB
channel: 4 (Loopback Output 2 (L)) - Int32LSB
channel: 5 (Loopback Output 2 (R)) - Int32LSB

All stated sample rates up to 96 kHz are supported. Headphones carry the same signal as line output but, as noted, have separate volume control.

Device under test [ASIO] Revelator ASIO
Operating mode 24-bit, 44 kHz
Audio interface ASIO
Signal path External loopback (line-out - line-in)
RMAA version 6.4.5 PRO
20 Hz–20 kHz filter YES
Signal normalization YES
Level change -0.3 dB / -0.3 dB
MONO mode NO
Calibration signal frequency, Hz 1000
Polarity Correct/correct

Frequency response variation (40 Hz–15 kHz), dB
-0.02, -0.17
Very good
Noise level, dB(A)
-97.8
Excellent
Dynamic range, dB(A)
97.4
Excellent
Harmonic distortion, %
0.011
Good
Harmonic distortion + noise, dB(A)
-76.3
Average
Intermodulation distortion + noise, %
0.012
Very good
Stereo crosstalk, dB
-97.2
Excellent
Intermodulation at 10 kHz, %
0.016
Very good
Overall rating
Very good

See the RMAA report for details

The Revelator io24 lacks a line input. This and the difference between input and output levels make loopback measurements look worse than the device's individual capabilities. Actual separate figures should approach the published specifications.

Conclusions

The Revelator io24 is one of this year's most interesting releases. It is particularly relevant as streaming grows. We are pleased that the Revelator microphone was followed by an interface that makes full use of PreSonus hardware processing. Converter quality fits the affordable price. For studio-only work without live processing, the more expensive, advanced PreSonus Studio range deserves attention. The io24 can still deliver good results, and includes Studio One Artist and Studio Magic software, downloadable after registration.



Note. This is an adapted machine translation into English. It follows the “In simple terms” approach. Read the original article at https://prosound.ixbt.com/interfaces/presonus-revio24.shtml.