M-Audio M-Game Solo review and test – interface for professional gamers and streamers
Maxim Liadov
M-Audio interfaces are established products for musicians, engineers and content creators. Demand from professional gamers and live streamers led to the separate M-Game brand and purpose-built models. Its first two products are Solo and RGB Dual. We test the smaller M-Game Solo.
Its appearance differs immediately from conventional professional interfaces. It clearly aims to look good on a stream. The fairly large, weighty case has large convenient controls and distinctive LED lighting.
Buttons 1, 2 and 3 trigger selectable samples, with applause, a drum fill and nature effects as defaults. The unusual $%^#* button bleeps unwanted language, with a choice of tones and horns. This is a particularly useful feature.
M-Game Solo specifications
| Headphone output | |
| Power | 42 mW RMS into 32 ohms |
| Dynamic range | 113 dBA |
| Frequency response | 20 Hz–20 kHz (+0.1/-0.2 dB) |
| THD+N | 0.005% at 10 mW |
| Maximum level | +6.0 dBu, unloaded |
| Output impedance | 10 ohms |
| Balanced XLR microphone input | |
| Frequency response | 20 Hz–20 kHz (+0.4/-1.8 dB) |
| Signal-to-noise ratio | 109 dBA (+4 dBu) |
| Dynamic range | 110 dBA |
| THD+N | 0.0015% (+4 dBu) |
| Maximum level | +5 dBu |
| Sensitivity | -54 dBu |
| EIN | -130 dBu |
| Gain | 59 dB, plus 24 dB digital gain |
| 1/8-inch TRS microphone input | |
| Frequency response | 20 Hz–20 kHz (+0.4/-1.9 dB) |
| Signal-to-noise ratio | 105 dBA (+4 dBu) |
| Dynamic range | 109 dBA |
| THD+N | 0.0033% (+4 dBu) |
| Maximum level | +5 dBu |
| Sensitivity | -54 dBu |
| EIN | -127 dBu |
| Gain | 59 dB, plus 24 dB digital gain |
Specifications are good, better than an average budget interface at this price.
All sockets are at the rear. M-Game Solo accepts professional XLR dynamic and condenser microphones and computer mini-jack microphones. The Windows/Mac OS X panel enables +48 V for condensers. Rear gain control is unusual but sensible: set it once for the microphone, then use the top fader for live changes without channel overload even at 100%. This follows professional equipment practice.
Other sockets are familiar colour-coded mini-jacks: pink MIC IN, black HP OUT, green MAIN OUT and blue AUX IN. Toslink accepts game-console audio. INPUT SWITCH is a TRS connection for a single or dual footswitch to trigger effects or samples.
The printer-style USB Type-B choice seems unusual beside USB-C. It may discourage connecting high-voltage phone chargers. A specific 6 V/2 A mains adapter is included. A separate POWER button is welcome, avoiding repeated unplugging.
Drivers are not publicly downloadable. An InMusic account and product serial registration are required. We disliked this restriction, but registration went smoothly and the download was quick.
The panel has 6 tabs. Its friendly graphics scale proportionally to 4K and higher-resolution screens and look excellent.

Beginners get helpful English-only tooltips when hovering over adjustable parameters.

SETUP provides useful voice-streaming hardware processing: de-esser, compressor, gate and EQ. A digital boost adds +24 dB to normal hardware gain.

ROUTING is a matrix selecting which signals reach the stream and software or hardware outputs. Calls can be answered privately before being sent live.
Submix channel levels may seem missing, but right-click opens them. They are simply hidden by default. The functions match professional equipment within a friendly interface.

SAMPLER previews sounds and assigns them to buttons 1, 2 and 3 for use during broadcasts.

Effects include DISTORTION, CHORUS and REVERB & ECHO. Their streaming use may not be obvious, but the DSP makes them available for creative needs, such as singing for viewers.

LEDS changes the level-column appearance. The default gradient can be replaced with pulsing modes or professional-style level metering.

Firmware updates are also released regularly.
The electronics bring pleasant surprises:
The audio-specific DREAM France processor includes four-core 24-bit DSP, 56-bit multiply-accumulate operations, double-precision processing, vector instructions and biquad filters.
Two modern TI PCM5102A DACs provide 32-bit/384 kHz, 112 dB dynamic range and -93 dB THD+N. Separate chips allow independent speaker and headphone submixes.
The TI PCM1840 ADC supports 32-bit/192 kHz and up to 4 mic/line channels, with 113 dB dynamic range and -98 dB THD+N.
The ON Semiconductor NCP2811 is an unusual headphone amplifier choice, delivering up to 60 mW per channel into 32 ohms. NOCAP avoids signal-path electrolytics, and startup/shutdown is click-free.
Latency is low at 5.9 ms with a 64-sample buffer. Output-only latency is lower still.
Features:
Input channels: 8
Output channels: 8
Input latency: 687
Output latency: 587
Min buffer size: 16
Max buffer size: 2048
Preferred buffer size: 512
Granularity: 16
ASIOOutputReady — supported
Sample rate:
8000 Hz — not supported
11025 Hz — not supported
16000 Hz — not supported
22050 Hz — not supported
32000 Hz — not supported
44100 Hz — not supported
48000 Hz — supported
88200 Hz — not supported
96000 Hz — not supported
176400 Hz — not supported
192000 Hz — not supported
352800 Hz — not supported
384000 Hz — not supported
Input channels:
channel: 0 (STREAM IN L) — Int32LSB
channel: 1 (STREAM IN R) — Int32LSB
channel: 2 (CHAT IN L) — Int32LSB
channel: 3 (CHAT IN R) — Int32LSB
channel: 4 (ALT IN L) — Int32LSB
channel: 5 (ALT IN R) — Int32LSB
channel: 6 (SAMPLER IN L) — Int32LSB
channel: 7 (SAMPLER IN R) — Int32LSB
Output channels:
channel: 0 (GAME OUT L) — Int32LSB
channel: 1 (GAME OUT R) — Int32LSB
channel: 2 (CHAT OUT L) — Int32LSB
channel: 3 (CHAT OUT R) — Int32LSB
channel: 4 (SAMPLER OUT L) — Int32LSB
channel: 5 (SAMPLER OUT R) — Int32LSB
channel: 6 (SYSTEM OUT L) — Int32LSB
channel: 7 (SYSTEM OUT R) — Int32LSB
ASIO has extensive routing options, but only 48 kHz operation, probably because DSP runs at one fixed rate.
RMAA testing
We measured the line output separately.
| Device under test | [ASIO] M-Game Solo |
| Operating mode | 24-bit, 44 kHz |
| Audio interface | ASIO |
| Signal path | line-out |
| RMAA version | 6.4.5 PRO |
| 20 Hz–20 kHz filter | ON |
| Signal normalization | ON |
| Level change | -3.3 dB / -3.2 dB |
| MONO mode | OFF |
| Calibration signal frequency, Hz | 1000 |
| Polarity | inverted/inverted |
| Frequency response variation (40 Hz–15 kHz), dB | +0.09, -0.05 |
Excellent |
| Noise level, dB(A) | -112.3 |
Excellent |
| Dynamic range, dB(A) | 105.0 |
Excellent |
| Harmonic distortion, % | 0.00222 |
Excellent |
| Harmonic distortion + noise, dB(A) | -89.7 |
Good |
| Intermodulation distortion + noise, % | 0.00282 |
Excellent |
| Stereo crosstalk, dB | -91.3 |
Excellent |
| Intermodulation at 10 kHz, % | 0.041 |
Good |
| Overall rating | Excellent |
Detailed 24-bit/44 kHz input measurements in the RMAA report
Measurements confirm the good published specifications.
We tested the microphone input with a Neumann TLM 102 condenser. Hardware gain was sufficient without digital boost. Recording quality was good, and effective processing quickly produced broadcast-ready voice. We used compression, gate, low cut and parametric EQ at 2 kHz with 3 dB gain. Headphones had enough volume for mainstream models, with 2/3 level leaving useful headroom. Operation resembles other professional interfaces, although learning the full panel takes time.
Conclusions
M-Game Solo marks a new M-Audio direction for streaming devices. It looks good, has interesting features and should find its audience. Considerable work is evident. This is more than lights and friendly software: its original electronics are better than expected at the price. Measurements, sound and broadcast effects were all good. We would like full-sized headphone and speaker sockets alongside mini-jacks, especially with room available in the large case. Our next review tests the higher-end RGB Dual.
Note. This is an adapted machine translation into English. It follows the “In simple terms” approach. Read the original article at https://prosound.ixbt.com/interfaces/m-audio-m-game-solo.shtml.





