ProSound

Professional Audio News & Reviews

Menu

Ferrum Hypsos review and test – hybrid power supply for hi-fi and pro audio equipment

Maxim Liadov

Ferrum products offer unusual features. The Hypsos power supply is one of this Polish manufacturer's most interesting designs. Made for high-end audio, it supplies significant power for desktop DACs and headphone amplifiers. Output voltage and cable polarity adjust conveniently in its screen menu. Many device-specific presets are available (full list on the official website). Most interestingly, Hypsos is hybrid, combining benefits of linear and switching supplies. It won the EISA Award Best Product 2021–2022 in Hi-Fi Accessory.

Our detailed 4K video review is also available; we recommend full-screen viewing. This written review has no running-time limit, so it provides more detail below.

Ferrum Hypsos specifications

  • Input: 110–120 and 220–240 V, 50–60 Hz (EU/US version), or 100 V, 50–60 Hz (Japan version)
  • Output voltage: 5–30 V
  • Maximum continuous current below 13.3 V: 6 A
  • Maximum continuous current above 13.3 V: 80 W / voltage in V
  • Maximum short-term current: 9 A
  • Maximum short-term power: DC voltage × 9 A (270 W at 30 V)
  • Maximum continuous power below 13.3 V: voltage in V × 6 A
  • Maximum continuous power above 13.3 V: 80 W
  • Dimensions (W×H×D): 217.50 × 50 × 206.50 mm
  • Weight: 2.89 kg
  • Consumption: 230 VA, 50 Hz, 12 V
    • Idle: 6 VA
    • 15 W load: 30.7 VA
    • 60 W load: 98 VA
    • 80 W load: 133.9 VA
  • Russian product page: http://ferrumaudio.ru/hypsos/

The Hypsos delivers 5–30 V through a standard 5.5 mm connector, with up to 6 A at lower voltages. Continuous output reaches 80 W, making it suitable for hundreds of products from different manufacturers. Unlike most supplies, it has a low-consumption standby mode and remote wake-up through TRG.

The all-metal case matches other Ferrum products, allowing an attractive stack.

The Ferrum logo is machined into the front, with white light visible through it. Brightness can be adjusted or turned off completely.

The large display normally shows voltage, current and output power. The encoder opens a menu with many adjustable settings.

The rear accepts universal 100–240 V AC at 50–60 Hz. This is common for switching supplies but valuable in a transformer-based unit.

Hypsos targets enthusiasts seeking extra system performance or a way to adjust sound.

A normal supply senses voltage internally for regulation feedback. Ferrum's 4TSD, or 4T Sensing Design, measures voltage directly at the load, removing dependence on cable losses. It uses the dedicated four-contact Ferrum Power Link (FPL) connector.

Even with a standard 5.5 mm connector at the device end, four wires are used. Two carry power, and two sense load voltage for feedback. The function can be disabled in the menu for comparison. The second display icon from the left shows its current mode.

For a technical explanation, start with the article on four-terminal sensing (Wikipedia) and then electrical-engineering textbooks covering DC measurement bridges. We also recommend downloading the white paper from Ferrum, which explains Hypsos operation across several pages.

New engineering costs money, but demanding users will pay when the benefit is worthwhile. We find this more interesting than buying expensive power cables alone to compensate for supply problems. Ferrum uses low-inductance Japanese Canare cable for its short leads.

Spread Spectrum Mode varies switching-modulator frequency by up to 20% around nominal. Spreading the frequency over a wider spectrum reduces electromagnetic interference and modulation harmonics. Ferrum recommends it for particularly sensitive equipment.

SST, Sweet Spot Tuning, adjusts output voltage in 0.1 V steps to find a preferred setting. Audio circuitry can react differently, for example through changed duty cycle in a PWM regulator. This may sometimes affect perceived sound.

Under the lid is advanced original circuitry not found in another product. An EMI filter sits at the input.

Next is HEM's own toroidal transformer with 2 primary 115 V windings and a 35 V secondary. A power relay automatically selects 110 V US or 220 V EU operation.

The rectifier uses powerful DSTF30120 Schottky diodes and large SLPX-NEG aluminium electrolytic capacitors. A BTA12-600CWRG triac also controls AC power.

The switching circuit uses an LT8646S controller rated at 65 V, 8 A and 2 MHz. Many high-quality ceramic capacitors are fitted.

An STM32F765 32-bit ARM processor handles control and display. Its firmware updates through micro-USB.

As with other Ferrum products, construction is high-class without extremely expensive audiophile components.

We repeat our observations from the Ferrum ERCO review. Many readers want to know whether Hypsos differs from an ordinary affordable switching supply.

The Ferrum ERCO DAC/amplifier includes a good MeanWell GST60A24 switching supply. Ferrum says ERCO performs best with its hybrid Hypsos power supply.

We used high-end Audeze MM-500 planar magnetic headphones, matching Ferrum's class. A laptop running Tidal played high-resolution tracks at the highest available resolution, confirmed by the green indicator.

Quick switching between supplies revealed a clear improvement. With Hypsos, sound became freer and more pleasant. The difference was not huge: MeanWell makes excellent switching supplies with strong value. Still, we would prefer the option of a linear supply. Hypsos combines transformer supplies' strong current delivery with precise voltage regulation despite mains and load changes. Dynamics became more accurate and effortless, with clearer instrument attack and bass. We liked both Ferrum's unusual approach and the result. Testing equipment from other brands suggested that the power-supply upgrade benefit grows with component price and quality.

Conclusions

The Hypsos is an original design. Inside, a linear transformer stage feeds a switching regulator and adjustable supply stage. This gives a broad voltage range, high power and strong current delivery, suiting Ferrum DACs and amplifiers as well as other equipment.

Its 4T Sensing Design, Ferrum Power Link, Spread Spectrum Mode and Sweet Spot Tuning give enthusiasts ways to experiment. This especially suits users who have tried other improvements and want maximum system quality. We welcome engineering-based design rather than rare expensive parts and precious-metal connectors. Our tests found an audible difference from inexpensive supplies on good high-end equipment.



Note. This is an adapted machine translation into English. It follows the “In simple terms” approach. Read the original article at https://prosound.ixbt.com/interfaces/ferrum-hypsos.shtml.