RCF TRK PRO1 and TRK PRO2 – recording interfaces from the Italian manufacturer
RCF has introduced the TRK PRO series for studio and home recording. These compact interfaces combine modern electronics with strong metal cases. Features include line/microphone/guitar inputs, a loud headphone output, hardware monitoring and a full ASIO driver for professional applications.
At the time of this review, the series has two devices with different dimensions and channel counts. The larger TRK PRO2 has two inputs, while the smaller TRK PRO1 has one. Both share the same electronics and similar functions, so we will examine the more capable model.
RCF also recommends the interfaces for use with its RDNet software for setting up live sound systems. More information about RDNet is available on the RCF website.
RCF TRK PRO2 specifications
| General | |
|---|---|
| Frequency range | 44.1, 48, 88.2, 96, 76.4, 192 kHz |
| Bit depth | 16-bit, 24-bit |
| Converter dynamic range | 114 dBA |
| Microphone input | |
| Frequency response | 20 Hz–20 kHz ±0.1 dB |
| THD+N | <0.0011% |
| Equivalent input noise (EIN) | < -120 dB |
| Dynamic range | 107 dBA |
| Impedance | 3.5 kohms |
| Gain range | -9 dB to +47 dB |
| Maximum level | +9 dBu |
| Line input | |
| Frequency response | 20 Hz–20 kHz ±0.1 dB |
| THD+N | <0.0011% |
| Dynamic range | 107 dBA |
| Impedance | 15 kohms |
| Gain range | -20 dB to +36 dB |
| Maximum level | +20 dBu |
| Guitar input | |
| Frequency response | 20 Hz–20 kHz ±0.1 dB |
| THD+N | <0.0025% |
| Dynamic range | 107 dBA |
| Impedance | 1 Mohm |
| Gain range | -10 dB to +46 dB |
| Maximum level | +10 dBu |
| Line output | |
| Frequency response | 20 Hz–20 kHz ±0.2 dB |
| THD+N | <0.0012% |
| Dynamic range | 107 dBA |
| Maximum level | +12 dBu |
| Headphone amplifier | |
| Power | 114 mW/channel |
| Impedance | <10 ohms |
| Dimensions and weight | |
| Height | 46 mm |
| Width | 210 mm |
| Depth | 125.8 mm |
| Weight | 850 g |
The TRK PRO interfaces have an interesting exterior. The angled front is more than a styling detail. It makes the case look smaller and gives easier access to the gain and volume knobs. The control labels are also easier to read.
The metal case provides good physical protection. The interfaces are suitable for heavy use, travel and location work. Rack installation is also possible: the TRK PRO2 includes L-shaped mounting brackets.
The TRK PRO2 follows a familiar control layout. Combo XLR/TRS inputs are on the left, with selectable line, microphone and guitar modes. Separate brightly lit buttons make the active mode easy to identify. Input indicators light blue when a signal is present and red during overload, helping users set the level.
The headphone output is on the right, beside the headphone volume and input hardware-monitoring controls. The large knob controls line output volume. A multi-segment meter with a decibel scale shows the output level. The TRK PRO2 has separate headphone and line output controls, which is very convenient.
The rear panel carries the TRS line outputs. A USB Type-B port connects the interface to a computer.
The interfaces use an XMOS XU208 digital processor. It handles USB and sends digital signals to the other chips.
A Cirrus Logic CS4272 stereo codec handles recording and playback. Its converters have good specifications: 114 dB dynamic range and THD+N <-100 dB.
The line outputs use JRC4580 op-amps. The microphone preamp combines a discrete transistor input stage with low-noise JRC 2122 chips.
The powerful headphone output uses a JRC3414A current buffer. This provides the impressive specified power of 114 mW.
The device control panel has a standard layout.

Users can select the ASIO buffer size. Safe Mode adds another USB buffer to prevent audio artifacts.

Round-trip latency was 7 ms with a 64-sample buffer at 44 kHz, typical of USB 2.0 interfaces.
ASIO diagnostics
Device: RCF USB Audio Device
Features:
Input channels: 2
Output channels: 2
Input latency: 578
Output latency: 772
Min buffer size: 8
Max buffer size: 2048
Preferred buffer size: 512
Granularity: -1
ASIOOutputReady - not supported
Sample rate:
8000 Hz - not supported
11025 Hz - not supported
16000 Hz - not supported
22050 Hz - not supported
32000 Hz - not supported
44100 Hz - supported
48000 Hz - supported
88200 Hz - supported
96000 Hz - supported
176400 Hz - supported
192000 Hz - supported
352800 Hz - not supported
384000 Hz - not supported
Input channels:
channel: 0 (Input 1) - Int32LSB
channel: 1 (Input 2) - Int32LSB
Output channels:
channel: 0 (Out 1 (Left)) - Int32LSB
channel: 1 (Out 2 (Right)) - Int32LSB
ASIO diagnostics show support for all modes up to 192 kHz. The system sees 2 inputs and 2 outputs. Headphones always carry the same signal as the line outputs.
RMAA testing
| Device under test | [ASIO] RCF USB Audio Device |
| Operating mode | 24-bit, 44 kHz |
| Audio interface | ASIO |
| Signal path | External loopback (line-out - line-in) |
| RMAA version | 6.4.5 PRO |
| 20 Hz–20 kHz filter | Yes |
| Signal normalization | Yes |
| Level change | -0.3 dB / -0.2 dB |
| MONO mode | none |
| Calibration signal frequency, Hz | 1000 |
| Polarity | Correct/correct |
| Frequency response variation (40 Hz–15 kHz), dB | +0.13, +0.03 |
Excellent |
| Noise level, dB(A) | -106.6 |
Excellent |
| Dynamic range, dB (A) | 106.6 |
Excellent |
| Harmonic distortion, % | 0.00033 |
Excellent |
| Harmonic distortion + noise, dB(A) | -96.5 |
Excellent |
| Intermodulation distortion + noise, % | 0.00173 |
Excellent |
| Stereo crosstalk, dB | -94.8 |
Excellent |
| Intermodulation at 10 kHz, % | 0.00165 |
Excellent |
| Overall rating | Excellent |
See the RMAA report for details
Our measurements fully confirm the manufacturer's specifications. Results are excellent, with a very clean spectrum and low distortion.
As usual, we tested the microphone input with a Neumann TLM102. There was enough gain for voice recording, and operation caused no problems. We used Cubase Pro. Beginners receive Cubase LE, Wavelab LE and Cubasis LE, REmatrix FIRST and Overloud BReverb 2 Essential reverb plug-ins, plus Overloud TH-U Essential guitar processing.
The RCF TRK PRO2 records well. The preamps add no particular tonal character. Sound is neutral and meets expectations for professional equipment. We liked the separate headphone and line output controls. The loud headphone output gives comfortable volume adjustment and lets users quickly change the balance between voice and backing track while recording.
Conclusions
The RCF TRK PRO1 and PRO2 have good electronics and deliver good recording and playback quality. These are RCF's first devices of this kind, and the Italian manufacturer has made a successful start. We preferred the larger TRK PRO2 for its useful hardware-monitoring features. It is among our favourites for both functions and ease of use. The TRK PRO1 suits users who need a very compact portable interface.
Note. This is an adapted machine translation into English. It follows the “In simple terms” approach. Read the original article at https://prosound.ixbt.com/interfaces/rcf-trk-pro.shtml.








