RCF DMA 504 review and test – four-channel matrix amplifier with 4 × 500 W
Italy's RCF needs little introduction. Since 1949, it has operated its own full-cycle Italian facility, developing and manufacturing a broad range for almost any professional audio task. We published a detailed visit to the RCF factory in Reggio Emilia, a centre of precision engineering. RCF deliberately keeps production in Italy to maintain quality and reliability. Specialists know this and often prefer RCF to heavily promoted brands that make most equipment in China. Lower purchase prices can carry risks and raise total cost of ownership, or TCO. In simple terms, servicing costs and practical problems over the equipment's life can increase greatly, along with possible reputational damage.
Let us turn to the product. The amplifier RCF DMA 504 was introduced in 2024 as the DMA flagship. The range currently includes DMA 82, DMA 162/162P and DMA 504. The first digits indicate power and the last digit channel or zone count. The 82 provides 80 W across 2 channels, the 162 provides 160 W across 2, and the 504 provides 500 W across 4. These power ratings are continuous per channel into 4 ohms; bridge mode can double them. Controls and features are similar across the range, including chaining up to four amplifiers for varied tasks.
RCF DMA 504 specifications
- Power with all channels driven:
4 × 700 W into 2.7 ohms
4 × 500 W into 4 ohms
4 × 300 W into 8 ohms
2 × 1100 W into 4 ohms, bridged
2 × 1000 W into 8 ohms, bridged - 70 V power: 2 × 1000 W
- Amplification: Class D
- Frequency range: 20–20000 Hz
- THD+N: <0.05%
- DSP, EQ and FIR filters
- Cooling: active
- Colour: black
- Rack mounting: 19 inches, 2U
- Dimensions (W×H×D): 430 × 96 × 360 mm
- Weight: 6.2 kg
All amplifiers in the RCF DMA are designed and optimized for professional use in public address. DMA stands for Digital Matrix Amplifier. Matrix refers to internal routing that sends mono or stereo sources to any channels. It is a complete solution for installers needing quality audio across multiple zones with flexible control. Stereo music use in bars and dance areas is possible too. The DMA 504 has enough power and an attractive appearance for rack or visible placement. A volume knob and standard source connections remain close at hand. It is user-friendly while handling complex installation projects.
The manufacturer's website shows typical installation examples, such as background music and announcements in shopping centres.
The diagram shows 3 large zones: furniture, books and electronics shops. Each amplifier channel feeds its own speaker network. The example includes 12 RCF WMR 60T speakers for the bookshop, six RCF Compact M 04 and three RCF Compact M 08. Three wired RCF RC401 controllers are built into the walls. An RCF BM 404 microphone handles announcements. Building emergency signals automatically mute music. Three analogue stereo inputs accept three different music feeds.
Previously, this task would need several 162 amplifiers with more complex connections and control. The 504 simplifies it significantly. Fewer cables are needed, and each zone maps to one amplifier channel, making the system easier for staff to understand and operate. Experienced designers select the amplifier according to zone size and required speaker count.
Another of many examples is a dance area using two powerful 10-inch speakers and a 15-inch subwoofer. Here, RCF Compact M10 speakers and an RCF S15 subwoofer are used. A consumer player or laptop can supply audio through standard RCA or mini-jack. An RCF RC401 provides wired remote control.
RCF makes both amplifiers and speakers, helping match system components. The amplifier stores presets for existing RCF speaker models, accounting for their characteristics and avoiding separate frequency and phase correction. These settings sit in the service menu so rarely used options do not complicate everyday controls.
Front white LEDs for CH A, CH B, CH C and CH D show MUTE, SIGNAL and PEAK. Other information appears on the OLED screen.
There are three main control methods: the amplifier's screen menu and controls, a mobile app with an optional Bluetooth module, or RCF's RD Net network protocol.
The important MATRIX tab routes signals. Sources include analogue inputs, the balanced mic/line input and a paging console through BM. Destinations are four output channels on a single amplifier, or buses when several amplifiers are chained.
The RD NET computer app shows all menu functions on one screen. Phase selection and bass enhancement are worth noting.
The internal digital mixer includes three-band EQ.
Settings can also be changed from the front. Simple LOW, MID and HIGH labels make operation easy for ordinary staff.
Professionals get parametric EQ with adjustable Q and linear-phase FiRPHASE filters. This allows a one-time speaker adjustment to the room.
Inputs accept line sources through stereo RCA and front mini-jack, plus balanced microphone signals. VOX gives microphone priority with an adjustable gate threshold. SUB OUT feeds active subwoofers with either a copy of the input or an 80–200 Hz low-pass-filtered signal. A covered slot accepts BT BOARD DMA for control and music over Bluetooth 5.0.
BM connects a paging console. BUS IN and BUS OUT chain up to 4 amplifiers. USB connects a computer for control and firmware updates. Above is a slot cover for the optional RDNET BOARD DMA.
Speaker outputs use standard EUROBLOCK connectors, with mating plugs included. RMT sockets connect RC401 wired controllers. The manual explains every contact.
We tested two RCF WMR 60T speakers with an external RCA source. Class D operation was silent and produced little heat. Active cooling starts only at very high output. Controls are simple enough without extensive manual reading. The attractive appearance allows visible placement as well as rack installation, keeping manual controls and source connections accessible.
Music sounded completely clean and clear, much better than typical PA systems and beyond our expectations. Its flagship status is justified. The recognizable RCF sound has full frequency coverage and clear bass despite our speakers' fairly small 6.5-inch woofers. A 1-inch tweeter reaches 20 kHz without audible coloration. With 140° dispersion, tonal balance stays stable as the listener moves. The WMR 60T also looks stylish, offers cabinet colour options and includes a wall bracket.
Conclusions
Our tests show that the RCF DMA 504 effectively combines 4 powerful 500 W amplifiers in one case with convenient unified control. It is a well-equipped flagship for simple and complex projects. Multiple control methods provide flexible room adjustment. Its full system benefits appear with matching speakers from RCF's broad range for many needs and situations.
Note. This is an adapted machine translation into English. It follows the “In simple terms” approach. Read the original article at https://prosound.ixbt.com/interfaces/rcf-dma500.shtml.













