Testing device | Lynx Studio E44 |
Sampling mode | 24-bit, 96 kHz |
Interface | ASIO |
Testing chain | External loopback (line-out - line-in) |
RMAA Version | 6.4.1 PRO |
20 Hz - 20 kHz filter | ON |
Normalize amplitude | ON |
Level change | -0.0 dB / -0.0 dB |
Mono mode | OFF |
Calibration singal, Hz | 1000 |
Polarity | correct/correct |
Frequency response (from 40 Hz to 15 kHz), dB | +0.00, -0.01 |
Excellent |
Noise level, dB (A) | -114.6 |
Excellent |
Dynamic range, dB (A) | 114.2 |
Excellent |
THD, % | 0.0003 |
Excellent |
THD + Noise, dB (A) | -105.4 |
Excellent |
IMD + Noise, % | 0.0006 |
Excellent |
Stereo crosstalk, dB | -112.1 |
Excellent |
IMD at 10 kHz, % | 0.0006 |
Excellent |
General performance | Excellent |
Left |
Right |
|
From 20 Hz to 20 kHz, dB | -0.03, +0.00 |
-0.03, -0.00 |
From 40 Hz to 15 kHz, dB | -0.01, +0.00 |
-0.01, -0.00 |
Left |
Right |
|
RMS power, dB | -113.5 |
-114.2 |
RMS power (A-weighted), dB | -114.0 |
-115.1 |
Peak level, dB FS | -88.8 |
-88.1 |
DC offset, % | -0.0 |
-0.0 |
Left |
Right |
|
Dynamic range, dB | +113.4 |
+114.1 |
Dynamic range (A-weighted), dB | +113.6 |
+114.8 |
DC offset, % | +0.00 |
+0.00 |
Left |
Right |
|
THD, % | +0.0003 |
+0.0003 |
THD + Noise, % | +0.0005 |
+0.0005 |
THD + Noise (A-weighted), % | +0.0006 |
+0.0005 |
Left |
Right |
|
IMD + Noise, % | +0.0007 |
+0.0006 |
IMD + Noise (A-weighted), % | +0.0006 |
+0.0005 |
Left |
Right |
|
Crosstalk at 100 Hz, dB | -113 |
-113 |
Crosstalk at 1000 Hz, dB | -112 |
-110 |
Crosstalk at 10000 Hz, dB | -110 |
-109 |
Left |
Right |
|
IMD + Noise at 5000 Hz, | 0.0007 |
0.0006 |
IMD + Noise at 10000 Hz, | 0.0006 |
0.0006 |
IMD + Noise at 15000 Hz, | 0.0006 |
0.0006 |