| Testing device | [ASIO] Apogee USB ASIO Driver | 
| Sampling mode | 32-bit, 44 kHz | 
| Interface | ASIO | 
| Testing chain | External loopback (line-out - line-in) | 
| RMAA Version | 6.4.5 PRO | 
| 20 Hz - 20 kHz filter | ON | 
| Normalize amplitude | ON | 
| Level change | -4.5 dB / -4.5 dB | 
| Mono mode | OFF | 
| Calibration singal, Hz | 1000 | 
| Polarity | correct/correct | 
| Frequency response (from 40 Hz to 15 kHz), dB | +0.04, -0.05 | Excellent | 
| Noise level, dB (A) | -118.0 | Excellent | 
| Dynamic range, dB (A) | 118.0 | Excellent | 
| THD, % | 0.00066 | Excellent | 
| THD + Noise, dB (A) | -99.1 | Excellent | 
| IMD + Noise, % | 0.00115 | Excellent | 
| Stereo crosstalk, dB | -118.6 | Excellent | 
| IMD at 10 kHz, % | 0.00114 | Excellent | 
| General performance | Excellent | 
 
| Left | Right | |
| From 20 Hz to 20 kHz, dB | -0.16, +0.04 | -0.16, +0.04 | 
| From 40 Hz to 15 kHz, dB | -0.05, +0.04 | -0.05, +0.04 | 
 
| Left | Right | |
| RMS power, dB | -116.9 | -116.9 | 
| RMS power (A-weighted), dB | -118.0 | -118.0 | 
| Peak level, dB FS | -98.3 | -98.3 | 
| DC offset, % | +0.0 | +0.0 | 
 
| Left | Right | |
| Dynamic range, dB | +116.9 | +116.9 | 
| Dynamic range (A-weighted), dB | +118.0 | +118.0 | 
| DC offset, % | +0.00 | +0.00 | 
 
| Left | Right | |
| THD, % | 0.00066 | 0.00066 | 
| THD + Noise, % | 0.00101 | 0.00101 | 
| THD + Noise (A-weighted), % | 0.00111 | 0.00111 | 
 
| Left | Right | |
| IMD + Noise, % | 0.00115 | 0.00115 | 
| IMD + Noise (A-weighted), % | 0.00089 | 0.00089 | 
 
| Left | Right | |
| Crosstalk at 100 Hz, dB | -116 | -117 | 
| Crosstalk at 1000 Hz, dB | -118 | -118 | 
| Crosstalk at 10000 Hz, dB | -116 | -116 | 
 
| Left | Right | |
| IMD + Noise at 5000 Hz, | 0.00125 | 0.00125 | 
| IMD + Noise at 10000 Hz, | 0.00109 | 0.00109 | 
| IMD + Noise at 15000 Hz, | 0.00109 | 0.00109 |